Powered by a centrifugal blower, the blower vacuum gripper generates negative pressure without the need for compressed air - just plug in power and it's ready to work, fully independent from pneumatic-driven vacuum generators. A clean, self-contained solution for facilities without centralized air supply.
The contact face uses high-performance EPDM foam with a honeycomb cell structure that self-conforms to rough and textured workpieces, delivering reliable grip on breathable materials like MDF, particle board, cardboard, and wood panels - while compensating for surface flatness variations across the workpiece.
Direct blower suction delivers continuous high-flow airflow with rapid vacuum build-up and snappy start/stop response - ideally suited for fast pick-up of breathable or porous workpieces across high-throughput production lines. Where an integrated generator model would lose seal on leaky or porous loads, the blower's constant airflow holds vacuum steady - a practical advantage on particle board, cardboard, and rough-sawn timber alike. A modular gripper design lets you combine multiple units for longer or wider coverage, easily handling large-format boards without custom engineering. The replaceable foam seal strip simplifies servicing - swap the strip on-site in minutes, not the whole gripper - keeping long-term maintenance costs low. Wide workpiece and industry compatibility means no frequent end-effector swaps required. The foam material also provides excellent cushioning and sealing, with gentle suction contact that protects precision workpieces from damage during pick-up and transport - stable loads, unmarked surfaces, cycle after cycle.

Product Code
- PVM
- 130×336
- N20
- V
- 3RA
|
Code |
Description |
|
PVM |
PV: standard vacuum gripper; X: built-in vacuum generator; M: external vacuum pump/blower |
|
130×336 |
Width × length dimension |
|
N20 |
N: foam thickness; P: suction cup diameter |
|
V |
V: with check valve; W: micro orifice |
|
3RA |
A: offset exhaust holes; without A, exhaust holes in a straight line; R: number of exhaust holes (e.g. 3R/5R) |






|
Attribute |
PVM-60 |
PVM-80 |
PVM-100 |
PVM-130 |
PVM-200 |
|
W |
60 |
80 |
100 |
130 |
200 |
|
L(Optional) |
228/ 336/ 444/ 642/ 840/ 984/ 1038/ 1236 |
228/ 336/ 444/ 642/ 840/ 984/ 1038/ 1236 |
228/ 336/ 444/ 642/ 840/ 984/ 1038/ 1236 |
228/ 336/ 444/ 642/ 840/ 984/ 1038/ 1236 |
228/ 336/ 444/ 642/ 840/ 984/ 1038/ 1236 |
|
V |
G1/ 8 |
G1/ 8 |
G1/ 8 |
G1/ 8 |
G1/ 8 |
|
S |
G1/ 4 |
G1/ 4 |
G1/ 4 |
G1/ 4 |
G1/ 4 |
|
N(Optional) |
5/ 10/ 20/ 30 |
5/ 10/ 20/ 30 |
5/ 10/ 20/ 30 |
5/ 10/ 20/ 30 |
5/ 10/ 20/ 30 |
|
Y |
44 |
52 |
75 |
90 |
160 |
|
H |
45 |
45 |
45 |
50 |
45.8 |
|
a |
6.3 |
10.2 |
10.2 |
10.2 |
10.2 |
|
b |
11.3 |
21 |
21 |
21 |
19 |
|
c |
2.4 |
3.5 |
3.5 |
4.5 |
3.4 |
|
h |
5.6 |
7 |
7 |
7.5 |
6.1 |


Hot Tags: blower vacuum gripper, China blower vacuum gripper manufacturers, suppliers, factory, Blower Type Silicone Suction Cup, Blower Vacuum Gripper, Foam Vacuum Gripper, Silicone Vacuum Gripper, vacuum gripper






